Vehicles
Sections
407 not categorized PORSCHE 996 SUSPENSIONCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: BOXSTER 1997-04 (includes uncategorized and accessory items) FVD33396410 A cost effective FVD exclusive combination of bilstein clubsport shocks with a set of eibach pro kit springs. This suspension kit is meant for those who want the car to sit at the lowest possible ride height. This set up will allow you to lower the front axle by 2.4 inches (60 mm). This is a perfect kit for clubsport or race use where the surfaces are smooth and even. The stock rs ride height was 1.6 inches (40 mm) lower. So, this is a full 3/4 of an inch (20 mm) lower on the front axle. Sold as a complete kit. 1 kit is necessary per car. Please note: we recommend the b6 / ohlins suspension kits for those looking for more comfort for street use.
$2,726.50
Make a selection 99634304137 Bilstein b4 OEM (original equipment manufacturer) replacement shock absorber for your Porsche with m030-sportsuspension. The b4 damper from bilstein is the perfect replacement for your Porsche. Facts: - constant damping power under any load - high power reserves for maximum safety - ride like it's the first time, every time - OEM quality - bilstein gas pressure technology
From $380.34
Make a selection FVD33399301 Bilstein suspension featuring with upside/down technology. Lowering 35 mm front and 30 mm rear - giving it a European rs stance
$12,023.00
Make a selection FVD721115003
$20.90
Make a selection FVD33399602B6 Bilstein suspension featuring eibach springs. Lowering 35 mm front and 30 mm rear - giving it a GT3 stance
$1,930.50
Make a selection FVD33399603B8 Bilstein suspension featuring with upside/down technology. Lowering 35 mm front and 30 mm rear - giving it a GT3 stance a winning combination of bilstein and eibach. Progressive springs for the street.
$2,131.80
Make a selection FVD721115002 Works on all bilstein coilovers!
$26.40
Make a selection SIC50158020 Correct early stamping without drain hole/impressions 90150158020
$330.00
Make a selection FVD33399300 A cost effective FVD exclusive combination of bilstein clubsport shocks with a set of TUV certified eibach springs. This suspension kit will lower the front axle to a maximum of 35 mm (1.37 inches) and the rear axle to 30 mm (1.18 inches), like the European rennsport model. The height is adjustable as the dampers are threaded. They are a cost effective solution for clubsport use and will be well mannered on the street. Sold as a complete kit. 1 kit is necessary per car.
$11,872.30
Make a selection FVDB68355CS1 With 030 sports suspension FVD Brombacherstainless steel brake lines for Porsche are manufactured in europe and are approved for all abs systems. They consist of a ptfe teflon inner liner surrounded by a stainless steel (inox) braided cover. They are also coated in a uv resistant pvc jacket to protect the wire and inner hose from the elements, chemicals and abrasion. This construction ensures minimal expansion inside the hose core and eliminates that "spongy" brake feel that is commonly found in the OEM brake lines. FVD Brombacherhas been tuning Porsche vehicles for over 30 + years now, so rest assured that our lines are a direct bolt on replacement for each Porsche application. Our lines are DOT approved b...(choose a part on the right to read more)
$192.50
Make a selection
$125.48
Make a selection 98633109304 Known as: strut f 98vs6 23164>> View/Change Diagram
$208.20
Make a selection RE3204 Securing a 997/996/Boxster or Cayman to a trailer is next to impossible without the use of wheel straps that are just about guaranteed to destroy your wheels in time. Save those expensive wheels with a set of inexpensive tie down hooks from rennline. These hooks have been specifically engineered to bolt to the front of your car without any modification or removal of any factory torque bolts. Another great feature of these hooks are that rennline has incorporated a much needed jack pad that will allow you to easily lift the front of your car without the worry of damaging your rocker panel or plastic under trays. Rennline's rear tie-down brackets are available in 66° to allow you to install these brackets in ma...(choose a part on the right to read more) General FitmentBOXSTER 1997-04BOXSTER 2005-08 CAYMAN 2006-08 911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$214.50
Make a selection 83290429576 Pentosin chf 11s hydraulic fluid formulated for power steering, rear axle steering, level control, hydro-pneumatic suspension and shock absorbers. Never mix with atf fluids. Chf 11s is fully compatible in power steering systems. General Fitment911 1989-94911 1994-98 BOXSTER 1997-04 911 1998-05 911 GT3 2003-05 911 TURBO/GT2 2001-05
From $25.00
Make a selection 00004320656 Pentosin chf 202 hydraulic fluid formulated for power steering, rear axle steering, level control, hydro-pneumatic suspension and shock absorbers. Never mix with atf fluids. Chf 202 and chf 11s are fully compatible in power steering systems. View/Change Diagram
From $14.82
Make a selection RS18 Set of two sealed monoball cartridges - front or rear. Most Porsche owners today, especially those of us who take our cars to the track, have equipped our cars with tires much wider and stickier than stock, which allows higher g-forces to be achieved in cornering and braking. During that type of hard driving, rubber suspension bushings are compressed and flexed by the extreme loads being put on them, defeating your car's finely tuned alignment settings, thereby reducing your braking and cornering potential. Monoballs are a downside-free improvement; because they eliminate four important sources of suspension slop without making your car's ride harsher. Your Porsche will handle and brake with greater precision...(choose a part on the right to read more) General FitmentBOXSTER 1997-04BOXSTER 2005-08 CAYMAN 2006-08 911 GT3 2007-11 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05
$250.00
Make a selection WAP06004610 Porsche bike s is a superbly built, lightweight "hardtail" that tackles mountains with an amazing battery of technologies. Start with its rigid triangulated frame of ultralight 7020 alloy aluminum, built around a 60mm main tube for stiffness and control. Add a motorcycle-style suspension fork for a smooth ride. Then bolt on the shimano rapid fire shifters for quick shifts on the go, plus magura hydraulic brakes for an astounding level of stop. And don't forget the shimano lx gearing that allows for smooth, rapid shifts (up to three shifts per stroke) even under a full load. The final result: a two-wheeled machine that's worthy of the name Porsche. Made in Germany.
$2,381.98
Make a selection SCSBSBALF096 At last, a strut tower brace that looks as good as it performs. Schnell performance is proud to announce it's all new, highly developed strut brace. Made of aircraft grade, polished aluminum. This design, pound for pound, is stiffer than other aluminum bars on the market. The anodized brackets bolt up with very little effort, making installation a cinch. Tighten up your cars suspension now for a safer, quieter and more accurate steering and braking. General Fitment911 1998-05BOXSTER 1997-04
$255.15
Make a selection SCSBSGALM086 At last, a strut tower brace that looks as good as it performs! Schnell performance is proud to announce it's all new, highly developed strut brace made of aircraft grade, polished aluminum. This design, pound for pound, is stiffer than other aluminum bars on the market. The hardened steel brackets bolt up with very little effort, making installation a cinch. Tighten up your cars suspension now for safer, quieter and more accurate steering and braking. General FitmentBOXSTER 1997-04
$228.15
Make a selection SCSBSGALF096 At last, a strut tower brace that looks as good as it performs. Schnell performance is proud to announce it's all new, highly developed strut brace made of aircraft grade, polished aluminum. This design, pound for pound, is stiffer than other aluminum bars on the market. The anodized brackets bolt up with very little effort, making installation a cinch. Tighten up your cars suspension now for a safer, quieter and more accurate steering and braking. General Fitment911 1998-05BOXSTER 1997-04
$255.15
Make a selection SCSBSSALM086 At last, a strut tower brace that looks as good as it performs. Schnell performance is proud to announce it's all new, highly developed strut brace made of aircraft grade, polished aluminum. This design, pound for pound, is stiffer than other aluminum bars on the market. The hardened steel brackets bolt up with very little effort, making installation a cinch. Tighten up your cars suspension now for safer, quieter and more accurate steering and braking. General FitmentBOXSTER 1997-04
$255.15
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |